Monday, May 28, 2012

DIY Kite Hair Bow Organizer: What I'm Makin' Monday

Finally got the craft bug again. Moving took it all out of me, but a huge blank wall in Lil' J's room was driving me nuts and I had to do something about it.
Something else I needed help with? My bow addiction. I've realized I have a bow hoarding problem. It's ridiculously hard for me to get rid of any bows because right before I do I think "but it'll go great with X-outfit" or "I can make a skirt to go with this."And I hang on to it. Unless I'm giving them away to friends, I can't bring myself to toss them out or even donate them yet.

I've already made a headband tree, used oatmeal cans to make more headband holders, and a picture frame to hold some clippies, but we still have more that need a home.

Thanks to Pinterest, I found another bow organizing tutorial that would also fill the annoyingly blank wall, and give a solution for her growing bow collection.

So I've seen ribbon bow holders. Simple strips of ribbon hanging from a doorknob or such, that you can clip your bows to. I found a genius tutorial that took it a step further and made the strip into kite tails and the bows clip to the tail.

With the amount of bows she has, and the amount of wall space, I decided to make four kites with long kite tails to string across her room.

Here's how I did it.


I used: Hot glue, scrap fabric, wire hangers, coordinating ribbon.

Step 1: Bend the wire pulling the bottom part of the hangar down so it becomes shaped more like a triangle. Straighten out the hook too (I kept mine slightly curvy since I wanted to look like it was flying across the wall.)

At this point, Lil' J already knew they were going to be kites. She ran around yelling "Kites! My kites!" After wrangling her I moved to step 2.
Step 2: Cut the scrap fabric to be about 1/2-1" wider than the kite shape.


Step 3: Hot glue the fabric to the wire one half of the kite at a time. Pull it tight as you glue the second side down.

Step 4: Cut and glue ribbon strips 1" longer than the length and width of the kite and glue them around the back side of the kite.

Step 5: Cut the ribbon for the kite tails/ bow holder and tie a knot with extra slack at the base of the kite, then glue the ribbon on each side of the hanger hook.

Hang on the wall and enjoy! What do ya think? Link up, I'd love to see what you've been makin'!
What I'm Making Monday

(highlight ctl+c)

Labels: , , , ,

Monday, February 20, 2012

How to make a headband holder using oatmeal cans: What I'm Makin' Monday

As I've mentioned before, Lil' J literally has HUNDREDS of hair bows. She wears one almost every day, and has at least one that'll mach every outfit.

I made a hair bow holder using a picture frame, a headband tree, and now, I have another way to store her bows.

I'm thinking I'm going to incorporate some random act of kindness with all of these bows we have. She sometimes gets a comments on her bows from other moms while we're out. Maybe I'll keep a stash with me to share with little girls who notice Lil' 's bows. It'll help me de-stash the overabundance and do something nice at the same time.
If you're looking for a way to organize headbands you have all over, here's one way. It frees up some space by creating a place to put bows inside and around.

Remember how I got oatmeal cans from a woman off Freecycle? Well little did I know there are a couple of sizes of oatmeal cans. I had the small kind, but the large kind are best for this project.

I bought two cylinders for about $3 each, poured the oatmeal into tubs, and got to work.
Here's what you'll need:
Oatmeal can
Scrapbook paper (or fabric)
Modge Podge or glue
Sponge or paint brush
Scissors

Step 1: Measure the height of the cylinder and cut the excess paper off so it'll fit height wise.

Step 2: Spread modge podge or glue the canister.


Step 3: Stick the paper to it. If it doesn't fit all around (mine didn't) then cut a little extra paper to close the gap, and glue.

Step 4: Cut a circle piece of scrapbook paper to fit on the lid and glue in place.

Step 5: Wait for it to dry and add hair bows.

TADA!

Easy enough right? Some people use candle stick holders to act as a prettier base, and if I find some at a thrift store I may add that element.

Hope this helps someone else who's overflowing with bows. Have you made anything crafty or delicious lately?

Labels: , , ,

Monday, November 14, 2011

DIY Toddler Sweater to Dress Tutorial with Ties: What I'm Makin Monday

I'm excited to show you this tutorial today. I made two sweater dresses, one I did exactly as this peasant-style sweater dress tutorial instructed (my green one), and after doing that I realized some ways to adapt it. I added ties, used a different kind of elastic and added ruffles, but I'll explain this all in the tutorial. I haven't had a chance to take cute photos of Lil' J in the pink one but once I do (later today) I'll add them to this post!
Sweater: Thrifted to Mom-Made Dress; Korker Bows: Mom Made (tutorial); Boots: Immanuel's Closet; Tights: Walmart
This is my favorite tutorial I've created to date and if you like it I'd appreciate your feedback so I know if I should continue sharing what I learn or stop pulling all-nighters spending extra time taking photos and posting about it. There are lots of go-to craft blogs and I'm definitely not one of them, but I think sharing some of the easy things I have learned can help inspire other domestic craft mama wannabes like myself. Anyway, on to the tutorial!
One thing I'll note off the bat is that when you choose your sweater note the size. I couldn't use one of my sweaters because I didn't have nay long enough. Lil' J is 16 months old and a tall girl, so the first dress we made was a tad short for my taste. The one I used for this tutorial is a size XL that I thrifted off eBay for $2.  I also got other sweaters from Goodwill for $3.99 to try this with.
Step 1: Lay out your sweater and take a dress you already have to measure the length you need. Line up the bottoms so you won't need to hem.
Step 2: Cut off the top part of the sweater. Both times I cut right under the neck line to get as much length as I could. For toddlers I think you'll need to do this. For babies you may be able to cut it a little shorter (gauge based on your example dress length.)
Step 3: Cut the sides off by cutting up along the side of the dress about 1" away from the example dress to add in a seam allowance (so when you sew it back together it's not too small.) (See photo above).

Step 4: Cut diagonal arm holes along the top part of your shape. I lined up my example dress and cut the holes along the same lines about the same length. I curved them a little to make them more arm-like.

Step 5: Cut off the cuffs of the sleeves on your sweater, if you don't have cuffs, cut the ends off so they're about the same length as the width of the arm hole (these are going to be your short sleeves).
Step 6: Pin the right sides of the sleeve ends to the right side of the dress so it connects the sleeves to the dress. I pinched the sides up and pinned them to make it obvious for you to see how it looks (for some reason this was really hard for me to understand at first).
Step 7: Use a zig-zag stitch to sew along the pins to attach the sleeves. I used the zig zag stitch since this knit material is stretchy and I didn't want the thread to snap and figured this would give it some more "give."
Step 8: With the dress inside out, cut the collar off your original sweater and pin the raw edges together, which puts the right side of the collar to the wrong side of the dress. Then sew around those pins.
Step 9: Sew the long ends that are left of the collar strip together, then sew them down to the dress.
Step 10: Flip the dress right side out, then flip the collar strip around the outside of the dress and sew it to the dress, but leave a 1-inch hole at the end to string elastic through.
Step 11: Use a small safety pin to string 1/4in elastic through the elastic casing. I cut my elastic 16.5in for my daughter since that's the length I've used for other peasant dress patterns. Then sew the two ends together and stuff it in the hole, sewing up the whole.
Step 12: Open of the dress and iron the seams flat (this gives it a more professional and less-home-made look by ironing the seams).
Step 13: Cut a strip off the long part of the sleeves of the sweater. I cut along the folded part opposite of the sleeve. Opened up it was about 2in wide. Fold that in half inside out, and sew down the side.
Step 14: Flip it right side out by sticking some object down the middle (I used a chop stick-type thing).
Step 15: Flip the dress inside out and pin the ties to the dress, one on each side, but make sure the ties are on the *INSIDE* of the dress the way it looks now. It looks anti-intuitive, but once you flip it inside out the ties will be on the outside. It looks like mine are going outside but I pushed them all the way inside before sewing.
Step 16: Starting at the sleeves, sew down each side of the dress, back-stitching over the ties to give extra enforcements.
It looks like this minus the ties and the bow:If you want, you can be done with your dress now, as it's real cute! Or read more to add ruffles...

Step 17: Cut another long strip (or two) from the sleeve section of your sweater, and leaving a long piece of thread before you start (so just pull a little bit out of your bobbin and top stitch before you start sewing), sew a long straight-stitch over one end of it pretty close to the edge.
Step 18: Pull the long piece of string at one end so it gathers and notice how it starts to ruffle. Pull the ruffle down the long strip until it's your desired length.
Step 19: Pin the ruffles to the dress and hand-stitch it to the dress. (I used my machine, but it was hard to keep everything lined up, so I went back and hand-stitched it to the dress, it didn't take very long.)

VIOLA!! And there you have a pretty, unique sweater dress for your toddler made from a thirifted and/or up-cycled sweater. I made these for just a few bucks, and it doesn't take long once you get the hang of it.
What do you think? I PROMISE if I can do it you can too! I'm not crafty and just started sewing about a month ago. Give it a try with a cheap sweater and show me when you do! Post a picture on my facebook page, I'd love to see.

Made anything lately? If you want to show it off link up below. 



Feel free to grab the button so others can know to share their craft ideas.
What I'm Making Monday

(highlight ctl+c)

Labels: , ,

Monday, October 31, 2011

Easy No- Sew Baby Leg Warmer Tutorial and the Cutest Thing I've Ever Made: What I'm Makin' Monday

What am I makin' this Monday? Only the cutest thing I've ever made... Minus my daughter herself.
Thursday night I was up until some crazy hour finishing on last Halloween dress for Lil' J to wear to school Friday. I purposely have been making ONLY seasonal clothes for her because that way I'm on a deadline to finish them all before the holiday is over. It forces me to use the fabric, and learn faster.

This is a reverse-knot dress. I got this pattern from Designs by Elli Ette Boutique. I added the sash myself by just sewing the right side ends together of 4in wide and 52in long fabric (hot dog style). Then flip it inside out and sew the ends.
Easy peasy!

But not as easy as these leg warmers she's wearing. I did an easy tutorial for them before she was born that was pretty easy but these were even easier.

I made her dress the night before right? Well, that next morning as we were leaving for work I realized it was sooo cold out! So I ran up to her sock drawer and pulled out some knee-high Halloween socks I had on standby. They are women's knee-high socks. There was a black pair and a striped pair so I grabbed one of each. I'm into mismatched leggings right now.
I ran downstairs and turned them in to leg warmers in 5 seconds... All you need are knee-high socks and scissors (preferably fabric scissors, but whatever).

Step 1: Cut the feet section off your socks.

TADA! You're done!

I put them on her with the top part of the socks that has the elastic stretch towards her thigh, and the ends are just loose. You can fold them up and pin them from the inside with a safety pin if you want or just do what I did and leave it unfinished. You can't really tell, since it's knit fabric it doesn't fray, and they are way cute and fast! Of course if you have more time check out my other tutorial for a slightly nicer way to finish them off.

It makes or a cute outfit spicer upper.

We went to the store with her dressed like this after work and school and at least 10 people commented on her outfit or "costume" as some called it. When some asked me what she was I said "a pretty witch" ... Whatever. I made the coordinating small bow that's in some of the photos. The fancy hat she's wearing in the others is by London Blue Designs and her shoes are from Cambria Laine.

I also made her Lamb Halloween Costume and I'll try to post a tutorial for that next week, unless it's lame that it's after Halloween. If so I'll just post a photo when I get a good one.

I hope you're enjoying my more frequent Makin' Monday posts. I'm trying to be more crafty and share what I'm making. Many of you have shared your new sewing talents with me posting pictures on my facebook page and emailing me, I'm loving it!It's great finding new ideas to try, testing them out, and sharing the ease of it all. I think is blog is motivating me to be crafty. Yall's positive reinforcement really helps. So THANKS!

Seriously, if I can do this stuff, you can too! I'm hoping to make a really easy dress tutorial soon if I can figure out how to make it myself. I'm also pinning sewing ideas like crazy on pinterest, so if you want to follow me there, my board to watch for is "SEW Making This"

Did you make anything this week?

I'd love to see! Link up! Grab a button to share if you want too!

What I'm Making Monday

(highlight ctl+c)

Labels: , , ,